1. Other Aviation Parts Accessories For Sale
  2. sku: 19136874676729502
  3. LEWIS 152BL702D

LEWIS 152BL702D Exhaust Temperature Indicator Removal

152bl702d Lewis Exhaust Temperature Indicator Free Shipping With Removal Tag

( Brand: Lewis ), ( Manufacturer Part Number: 152BL702D ), ( Part Type: Exhaust Indicator ), ( Country Of Origin: United States )

Review LEWIS Exhaust Temperature Indicator Free Shipping Removal Tag

The Lewis 152BL702D Exhaust Temperature Indicator is a crucial component in monitoring the temperature of your exhaust system. This device is designed to provide real-time information about the temperature of your exhaust gases, helping you maintain optimal operating conditions for your engine and ensuring its longevity.

The indicator is a round, black gauge with a white face and a red needle. The gauge measures approximately 2 inches in diameter and 1 inch in depth. The needle moves smoothly across the temperature scale, which ranges from 0 to 300 degrees Fahrenheit. The gauge is housed in a sturdy metal casing that is resistant to the harsh conditions of the engine compartment.

The Lewis 152BL702D Exhaust Temperature Indicator is designed to be easily installed on most vehicles. It uses a bung sensor that screws into the exhaust manifold or header, allowing the gauge to read the temperature of the exhaust gases directly. The sensor comes with a high-temperature gasket and a stainless steel washer to ensure a secure and leak-free installation.

To remove the Lewis 152BL702D Exhaust Temperature Indicator, you will need to follow these steps:

1. Locate the exhaust temperature gauge on your vehicle's dashboard. This gauge may be located near the engine temperature gauge or other warning lights.

2. Identify the wiring harness connected to the gauge. This harness will typically have three wires: a ground wire, a constant power wire, and a signal wire.

3. Disconnect the wiring harness from the gauge. You may need to use a flathead screwdriver or a wrench to remove any retaining clips or screws.

4. Remove the gauge from the dashboard. This may involve removing screws or clips that hold it in place.

5. Locate the exhaust temperature sensor on your vehicle. This sensor will typically be located near the exhaust manifold or header, and will be connected to the wiring harness with three wires.

6. Disconnect the wiring harness from the sensor. Again, you may need to use a flathead screwdriver or a wrench to remove any retaining clips or screws.

7. Carefully remove the sensor from the exhaust system. Be sure to protect your hands from the hot exhaust gases, and use a wrench or other tool to loosen any clamps or bolts that are holding the sensor in place.

8. Clean the area around the sensor where the new Lewis 152BL702D Exhaust Temperature Indicator will be installed.

9. Install the new sensor in the same location as the old one, using the provided gasket and washer to ensure a secure and leak-free installation.

10. Connect the wiring harness to the new sensor, making sure that the ground wire is connected to a good ground point on the engine or exhaust system, the constant power wire is connected to a stable power source, and the signal wire is connected to the appropriate location on the engine control module or other relevant electrical system component.

11. Install the new gauge on the dashboard, using the provided mounting hardware to secure it in place.

12. Connect the wiring harness to the new gauge, making sure that the ground wire is connected to a good ground point on the dashboard or vehicle body, the constant power wire is connected to a stable power source, and the signal wire is connected to the appropriate location on the gauge.

13. Test the new Lewis 152BL702D Exhaust Temperature Indicator to ensure that it is functioning properly.

By following these steps carefully, you can successfully remove the old Lewis 152BL702D Exhaust Temperature Indicator and install a new one on your vehicle. This process may require some mechanical skills and the use of tools, so be sure to take your time and work carefully to avoid damaging any components or causing any safety issues.

Removing a Lewis 152BL702D exhaust temperature indicator can have both advantages and disadvantages, depending on your specific circumstances. Here's a brief analysis of each:

Advantages:

1. Aesthetics: The temperature gauge can add an unnecessary clutter to the dashboard, which some people may prefer to eliminate for a cleaner look.

2. Cost: The cost of the gauge itself, as well as the labor to install it, can be a significant expense for some vehicle owners. By removing it, you can save yourself some money.

3. Simplification: Some drivers may find that they don't need the temperature gauge to safely operate their vehicle. Removing it can simplify the vehicle's electrical system and potentially reduce the chances of a malfunction.

Disadvantages:

1. Safety: The temperature gauge is an important safety feature that helps drivers monitor their engine's temperature. Removing it could potentially put you at risk for engine overheating, which can cause serious damage to the vehicle.

2. Maintenance: Without the temperature gauge, you may not be able to easily monitor your engine temperature and could potentially miss early warning signs of a problem. Regular maintenance checks are still necessary to ensure the health of your engine.

3. Diagnostic capabilities: The temperature gauge can provide valuable diagnostic information in the event of a problem. Removing it could limit your ability to diagnose and address issues with your engine.

In conclusion, while removing the Lewis 152BL702D exhaust temperature indicator can offer some benefits, such as cost savings and aesthetic appeal, the potential risks to safety, maintenance, and diagnostic capabilities are significant. It's important to carefully weigh the pros and cons before making a decision.

If you do decide to remove the temperature gauge, we recommend investing in other methods to monitor your engine temperature, such as a handheld temperature gun or regular checks with a mechanic. Additionally, be aware that removing the gauge may void your vehicle's warranty, so be sure to check with your dealership or insurance provider before making any modifications.

Our recommendation is to carefully consider the reasons for removing the temperature gauge and weigh the potential risks and benefits before making a decision. If safety is a concern, it may be best to keep the gauge in place.

Details:

The 152BL702D Lewis Exhaust Temperature Indicator is a high-quality aviation part manufactured in the USA by. It comes with a 60-day warranty and is designed to accurately indicate exhaust temperature levels.

part #: 152bl702d price

  • $99.00

specifications aviationpar:

  • brand: Lewis
  • mpn: 152bl702d
  • part type: Exhaust Indicator
  • country of origin: United States

returns aviationpar:

  • time: 30 Days
  • paid by: Seller
  • policy: Returns Accepted

payments aviationpar:

  • credit card: Discover
  • other
  • wallet: Google-pay

general aviationpar:

  • condition: Used
  • Parts Accessories > Aviation Parts Accessories > Parts

offer aviationpar:

  • started: December 18, 2025
  • availability: In Stock
  • options: Ship-to-home
  • quantity: 1
  • sold: 0
  • best offers: True

shipping aviationpar:

  • type: Calculated
  • class: Standard, Expedited, One-day
  • cost: $0.00
  • transit: 4-11 Days
  • carrier: USPS, FedEx
  • service: USPS Ground Advantage, USPS Priority Mail, FedEx Standard Overnight

seller aviationpar:

  • rating: 98.0%
  • city: Tampa, Florida
  • # reviews: 1547
part type: exhaust indicator, country of origin: united states,
category: auto parts > aviation parts accessories > parts, sku: 19136874676729502,
Lewis 152BL702D Is Similar To:
aviationpar logo
1 offer $99.00 USD
  • Used. Offer #1 priced at $99.00 + $0.00 shipping estimate = $99.00* total. The Lewis Exhaust Temperature Indicator is a high-quality aviation part manufactured in the United States by Lewis.FREE SHIPPING

Copyright © aviationpar.com