DALE HLM-10-10Z-4 Wire Wound Resistors 5/5
( Brand: Dale ), ( Manufacturer Part Number: HLM-10-10Z-4 ), ( Part Type: Wire Resistor )
Review DALE Wire Wound Resistors
The HLM-10-10Z-4 Dale Wire Wound Resistors are high-quality electronic components designed for various applications that require precise and stable resistance values. These resistors are made using a wire wound technique, which allows for a higher power rating and more precise tolerance levels than other types of resistors.
The HLM-10-10Z-4 Dale Wire Wound Resistors have a resistance value of 10 ohms with a tolerance of /- 10%, which means that the actual resistance value may vary slightly from the specified value. They have a power rating of 4 watts, which makes them suitable for use in moderate-power applications such as audio amplifiers, power supplies, and signal conditioning circuits.
The resistors are made of high-quality carbon composition wire, which is wound around a ceramic or metal core to form a coil. The coil is then covered with an epoxy resin coating to protect it from moisture and other environmental factors. The resistors have a wire lead termination, which can be easily soldered to a circuit board or other electrical components.
The HLM-10-10Z-4 Dale Wire Wound Resistors have a temperature coefficient of resistance (TCR) of 250 ppm/ C, which means that their resistance value will change by 0.00025% for every degree Celsius change in temperature. This makes them suitable for applications where temperature stability is important, such as in precision instruments and automotive electronics.
In summary, the HLM-10-10Z-4 Dale Wire Wound Resistors are high-quality electronic components with a wire wound construction, a resistance value of 10 ohms with a tolerance of /- 10%, a power rating of 4 watts, and a temperature coefficient of resistance of 250 ppm/ C. They are suitable for use in various applications that require precise and stable resistance values, such as audio amplifiers, power supplies, and signal conditioning circuits.
Pros of buying HLM-10-10Z-4 Dale Wire Wound Resistors:1. High Quality: Dale is a well-known brand in the electronics industry, known for its high-quality products. These resistors are wire wound, which means they have a more stable resistance value over time compared to other types of resistors.
2. Precision: The HLM-10-10Z-4 series offers a tolerance of /- 1%, making them suitable for applications that require precise resistance values.
3. Variety of Values: These resistors are available in a wide range of values, from 1 to 100 M , which makes them versatile for use in various electronic circuits.
4. Temperature Stability: Wire wound resistors have better temperature coefficient than other types of resistors, which means their resistance value doesn't change significantly with changes in temperature.
Cons of buying HLM-10-10Z-4 Dale Wire Wound Resistors:1. Cost: Wire wound resistors, in general, are more expensive than other types of resistors due to their manufacturing process.
2. Size: Due to their physical construction, wire wound resistors are usually larger and heavier than other types of resistors, which can be a disadvantage in applications where space is a limiting factor.
3. Limited Power Rating: Compared to other types of resistors, wire wound resistors have a lower power rating. This means they should not be used in applications where they will be subjected to high power levels.
Conclusion:HLM-10-10Z-4 Dale Wire Wound Resistors are a good choice for applications that require high precision and stability, such as audio circuits, precision measuring instruments, and control systems. However, their cost and size may be a disadvantage in some applications. If cost and size are not a major concern, and precision and stability are important, these resistors would be a good choice. If cost and size are more important, consider using other types of resistors that offer similar properties but at a lower cost and size.
Details:
Any is for the sole purpose of identifying an item. Big props aviation - your source for aircraft parts.
Up for sale is: 37 Dale wire wound resistors P/N HLM-10-10Z-4 5 new is vacuum sealed pack sale all. Airworthiness is only determined by the FAA approved mechanic or certified repair station.
Multiple photos to view. New listings added weekly and usually daily.
Your source for aircraft parts.
part #: hlm1010z4 price
- $78.75
specifications aviationpar:
- brand: Dale
- mpn: Hlm-10-10z-4
- part type: Wire Resistor
Ratings:
- a 04-19-17
- Prompt shipping and a great looking product 04-20-17
- Great Service! 04-20-17
- A ,great contact and very fast delivery ,highly recommended: cheersFrom Dk 04-21-17
- x 04-21-17
Offer aviationpar:
- Started: April 20, 2017, 10:59 am
- quantity: 1
- bids: 0
- Sold: 0
- best offer: true
Seller aviationpar:
- zipcode: 85381
- city: Peoria, Arizona
Payments aviationpar:
- PayPal
Returns aviationpar:
- paid by: Buyer
- type: Money Back
- policy: returns accepted
- time: 14 Days
Shipping aviationpar:
- cost: $8.99
- type: Flat
- handling: 1 days
General aviationpar:
- condition: New
- in stock: Yes
- motors > parts accessories > aviation parts accessories motors > other aviation parts accessories
